高压涡旋风机风压高，广泛应用于快速干燥、水处理、电镀槽液搅拌、除尘通风、流体输送、养殖增氧、食品加工等方面。
性能与特点:

  1：具有吹吸双功能，一机两用，能够吸风，也可以吹风。而且也能够同时使用吸风和吹风，此款设备就相当于旋片真空泵一样的功能。

  2：此款设备均是少油或无油运转，而且此款设备的输出空气是干净的。

  3：相对于离心风机和中压风机来说，该款设备的压力高很多，而且基本上也都是离心风机的十几倍以上。

  4：免维护使用。这种类型的设备器损耗件仅仅是两个轴承，而且只要设备是在质保期之内，那么基本上都是不需要维护。

  5：相对到其它类型的风机，其运转的噪音较低，功率越大越明显，5.5KW以上就会显示出来。

  6：如果泵体是整体压铸，并且使用了防震安装脚座，那么它对安装基础的要求也是很低的，甚至可以不用固定脚座即可正常运转，非常的方便，也非常的节省安装费用和安装周期。

  7：高压鼓风机的机械磨损非常微小，基本上这种设备除了轴承之外，其实很多时候它都没其它的机械接触部分，所以，使用寿命当然也是非常的长

Side Channel Blower High wind pressure, widely used in rapid drying, water treatment, electroplating bath agitation, dust removal and ventilation, fluid conveying, aquaculture oxygenation, food processing and other fields.

Performance & Features

1. Dual blowing and suction functions in one unit. It can either blow or suck air independently, and even perform both operations simultaneously. Its functionality is equivalent to that of a rotary vane vacuum pump.

2. The equipment operates with minimal oil or oil-free, delivering clean output air.

3. Compared with centrifugal fans and medium-pressure fans, this unit offers significantly higher pressure, which is basically more than ten times that of centrifugal fans.

4. Maintenance-free operation. The only wearing parts of this equipment are two bearings. During the warranty period, it basically requires no maintenance at all.

5. Lower operating noise compared with other types of fans, with the advantage becoming more pronounced with increased power—evident in models of 5.5KW and above.

6. The pump body is integrally die-cast and equipped with shock-absorbing mounting feet, resulting in extremely low requirements for the installation foundation. It can even operate normally without fixed mounting feet, offering great convenience while substantially reducing installation costs and shortening the installation cycle.

7. The mechanical wear of this high-pressure blower is minimal. Except for the bearings, there are virtually no other mechanical contact parts in most cases, ensuring an exceptionally long service life.

Technical Parameters Table